Please note that colors may appear slightly different than actual finishes due to the computer monitor.

Retail prices on the list are applicable for Japanese market only. Please ask local distributors about their region prices.
※Clicking on the number of inches will display the specification table.





[Includes] Flat Center Cap type 2

[OPTION PARTS] Center Cap type 2

[OPTION PARTS] Flat Center Cap type 2

*Flat center cap may not fit to some cars due to the hub clearance. Please check “HUB CLEARANCE” in the specification table and actual car.


Light Alloy Valve[#S27A2B] JPY 1,500 (Tax excluding)
Flat Center Cap type 2(Gloss Black)[#52491] JPY 2,500 (Tax excluding)
Flat Center Cap type 2(Gold)[#52724] JPY 2,500 (Tax excluding)


All of WEDS wheels listed on this website comply with the Technical Standards for Automotive Light Alloy Disk Wheels (JWL for passenger cars and JWL-T for trucks and buses). Furthermore, having passed the rigorous tests conducted by the Automotive Light Alloy Wheel Testing Council and our wheels acquire the VIA mark. However, unless the company is found to be liable for compensation under the law, Weds accepts no responsibility and offers no warranty in the event of accidents or deformed or cracked wheels caused by any of the following circumstances: driving the car in places where motor vehicles don’t usually go; driving the car on a racing circuit; using the car to race in a rally or for similar purposes that will exceed the limits on its use; by modifying the car illegally; and by failing to perform everyday maintenance checks that would have identified the defect responsible for the issue.


In addition to the inner rim, now we enable to spin outer rim using New Technology "Double AMF".

Finally making outer rim from AMF formula has well-established by applying cutting edge technology. Double AMF technology enable us to spin both outer and inner rim while being deep rim type.(*only available size over 9.0J)

"AIR+" shape unnecessary thickness of the wheel. "AIR+" increases air volume which provide additional stability.

Uncompromising standard for WedsSport wheels. Explore excess of flesh completely, and trim the flesh by keeping the strength. Not only trimming, but increasing air volume to make the air pressure stable. This is “AIR+PLUS” system which satisfy both light-weight and air volume.

Design Registration NO.1554006号

"H" Cross Section Shape Scraped off with Side Machining

Pursuing ideal spoke cross section shape, finally we come up with “H-Shape”. Adding machining process, “H” Cross Section Shape has achieved that was impossible by casting.  RN Series further reduced weight by trimming the spoke to the limit with side machining. Light sport wheel with new concept of Attractive Design and Light-Weight has born.

The technology accelerates sports wheel evolution

AMF (Advanced Metal Forming) is one variation of rotation forming process that rotates a metal pipe axis and casts the material on the roller.